-
product
Water Leak Detection Equipment
Find and pinpoint leaks on a water network under paved and unpaved surfacesPrevent unnecessary excavation worksLocate the leak at valves and hydrants, in water pipes of small diameters and in hard-to-reach places by using special extra toolsIsolate parasitic noise and focus on the potential leak sound
-
product
Fluorescent Leak Detection
How to pinpoint the exact source of leaks, save money, and protect your business. Our OEM approved fluorescent dyes work as a preventive maintenance system to protect your workers and your business. Our safety products are being utilized in mines all over the world.
-
product
UV Lamp Leak Detection Flashlight
LF500CS
The LeakFinder LF500CS is a powerful violet light LED leak detection flashlight. The flashlights compact design offers optimal coverage of a vehicle’s leaking systems – allowing the user to scan for escaping fluorescent dye in the tightest and hardest to reach places. available 3 /18
-
product
Utility Service And Leak Detection
Accurately preparing the site to make sure you know where all the utility services run can pay handsomely by avoiding those expensive digger accidents.
-
product
Gas and Leak Detection
Is used to determine if and in some cases where a leak has occurred in systems which contain liquids and gases.
-
product
Advanced Natural Gas Leak Detection Platform
ABB Ability Series
Altogether, the complete ABB Gas Leak Detection Platform makes it possible to find leaks throughout the entire natural gas infrastructure – upstream, midstream, downstream, and from utilities – with far higher reliability and speed than ever before by combining leading-edge, cybersecure measurement technology, with advanced data analytics.
-
product
Refrigerant Leak Detection Camera
FLIR GF304
The FLIR GF304 detects refrigerant gas leaks without interrupting or shutting down operations. Refrigerant gases are highly toxic, environmentally harmful, and heavily regulated. By detecting refrigerant gas leaks early, companies can avoid the cost of replenishment and limit environmental impact. The GF304 allows inspectors to visualize these gases, discover hidden leaks, and confirm repairs once their complete.
-
product
Systems for Water Leak Detection
Here you are getting an overview about our devices for water leak detection. In our portfolio you can find systems for electro-acoustic water leak detection, compact onehand receiver, correlators, stationary noise loggers and a lot more...
-
product
Leak Detection Flashlight
LT-300 LeakTracker
The LeakTracker is a durable, yet economical, LED leak detection flashlight that delivers pure UV light for superior fluorescent dye response. It works with all fluid dyes and systems, producing a brilliant glow that makes leaks easier to spotslashing diagnostic time! The LeakTracker is ideal for all industrial fluid system applications.
-
product
Leak Detect Stik Liquid Level Sensor
7100
The 7100 leak detect stik is a liquid level sensor that takes field proven magnetostrictive sensing technology and packages it in a revolutionary new way for greater reliability and for easy installation and mounting.The 7100 leak detect stik has PPM (Pulse Position Modulated) outputs for product and interface level and for temperature measurement, which are all superimposed on the two wire power line.All sensor electronics used in this liquid level sensor are SMT components integrated into the 5/8” diameter sensing tube. This breakthrough in package design eliminates the bulky electronics enclosure at the top of the sensor and offers you greater options for insertion.
-
product
Leak Analysis
Hiden LAS
The Hiden LAS system is designed to analyze the leak rate from sealed packages, from a quality control or research and development perspective.
-
product
Aftermarket Automotive Leak Detection
LeakFinder
The LeakFinder brand is Tracer Products cost-effective solution for end-users in the automotive aftermarket. LeakFinder products are made for DIY jobs and small to mid-sized automotive repair shops. They are the perfect tool for finding small, sporadic leaks in automotive A/C and fluid systems.
-
product
LEAK TESTER
Quickly and easily detect air and water leaks in building envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems.
-
product
Leak Tester
LSD-01A
Jinan Leading Instruments Co., Ltd.
LSD-01A Leak Tester is applicablein leak testing of pouches, bottles, pipes, cans and boxes of foodstuff,pharmaceutical, medical, daily chemistry, automotive, electronic components, stationary and other industries. It’ s also applicable in the leak testing ofthe specimens after falling tests and pressure resistance tests.
-
product
Leak Detectors
High sensitivity setting locates R134A leaks to 3gm/yearFlexible gooseneck probeEasy one handed operationAudible & visual indicatorsRubber sleeve protects detector & probe
-
product
Radiation Detection
Nuclear and radiological materials are of particular concern because of their potential to harm large numbers of people and disrupt the global economy.
-
product
Leak Masters
Uson provides automatic non-destructive air leak and flow measurement equipment and solutions used in product development and manufacturing environments for medical device, automotive, electric vehicle battery, packaging and industrial applications. Uson leak testers are highly configurable and are built with premium components ensuring maximum quality, reliability and performance.
-
product
Water Leak Detectors
To install the optional cable sensor, simply plug it into the detector. The entire length of cable is an extended sensor. Additional 4 foot cable sensors (sold separately) can be connected to extend the cable and increase water sensing area even more. Note: The cable sensor jack is NOT for plugging in a power adapter. Doing so could damage the detector.**
-
product
optical liquid leak detection system
LEAKLEARN®
The LEAKLEARN OPT liquid leak detection system incorporates fluoropolymer optical fiber sensors and detectors, emitting light when fluoropolymer optical fiber sensors contact liquid. T
-
product
Gas Leak Detector
GSD600
The Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected. The frequency of the beep coincides with the concentration of the gas. The LEDs display the level of gas present in an area or room. Pinpoint gas leaks for closed piping systems. Use the mute function in quiet work areas and utilize the LED displays. Or a standard earphone jack for hearing the meter in loud environments.
-
product
Hydrogen Leak Tester
T8999
T8999 is a tool designed to meet the increasing need for easy and clean identification of the position of the leak on a piece being tested, therefore eliminating the need for methods such as water tank immersion or use of leak detecting sprays, which are harmful for the pieces which could develop rust or pieces that are difficult to accurately clean.
-
product
Refrigerant Leak Detectors
750a
Test Products International, Inc.
Whether testing for leaks in air conditioning, refrigeration, or automotive AC, the versatile 700 series spans the diverse needs of technicians, refrigeration engineers, and maintenance personnel around the globe. From freezer coils to heat pumps, experience fast, reliable results that save you both time and money.
-
product
Bio-Threat Detection & Collection
IBAC 2
The IBAC 2 is a fully automated bio-detection sensor that can support continual, 24/7, air monitoring or can be set to targeting sampling windows to align to hours of operation. It alarms in less than 60 seconds when a bio-threat is present. IBAC can be configured to support automated aerosol sampling either in conjunction with its’ triggered alarms or at a set frequency sampling time. In wide service throughout the world, IBAC 2 is used to collect and detect aerosolized agents for all four classes of biological threats (spore, viral, cellular, and protein toxins) with low false alarm.
-
-
product
Leak Testing
Leak testing is a non-destructive method to verify the presence of a leak in a component or device.It is implemented as a control methodology for monitoring production process and product quality control. Leak tests are used to find out possible leaks due to non-suitable material (porosity, blowholes, cracks), or in the machining process to find out machining errors or defective parts, and ultimately in assembly, to find out missing or defective gaskets, wrong positioning or assembly. The presence of a leakage could jeopardize the correct functioning of the component, device or its life span, and can also be potentially dangerous for the environment and the safety of its user.
-
product
Neutronic Detection
Neutron imaging is a non-destructive method used to see inside objects that may be inpenetrable by X-ray or other techniques.Neutrons offer the benefit of being able to see through heavy metals such as lead but can also be used to examine delicate processes.Photonis Neutron detector is designed to provide either still images or video using both cold and thermal neutron imaging techniquesfor non-destructive testing and neutron tomography.
-
product
Gas Detection
Explosive or toxic gases are a constant threat in industry as well as civil and military security. Second Sight is an innovative instrument to protect infrastructures and population throuht early warning.
-
product
Pinhole Detection Devices
ElektroPhysik Dr. Steingroever GmbH & Co. KG
The coating control by means of pore testing makes use of electrical voltage in order to uncover microscopically small defects (> 20 μm) in the coating of a surface. If even a small defect can be detected during pore testing of surface coatings, urgent action is required. Minimal flaws in the coating are sufficient to cause great damage.
-
product
PMS Leak Test System
The system (Pressure Measuring System) is a portable, complete system for leak tests. This consist of the pressure test kit PMS3000 for performing leak tests with an integrated graphic-capable 4.3” color touch display and a pressure relief kit DAK2000 for discharge test according to W400-2, Part 16 pressure loss methods as well as DIN EN 805. The system is complemented by a variety of connection accessories like the rugged accessory case (individually equipped), the test standpipe PSR and accessories for building gas connection as well as the electronically controlled test pumps EPP and the compact air compressor KLK1030.
-
product
Radiation Detection
Radiation detectors for safety quality assurance is top of mind for hospitals, nuclear power facilities, nuclear medicine laboratories, x-ray manufacturers, government agencies, state inspectors, emergency response and HAZMAT teams, and police and fire departments around the world. Fluke Biomedical offers a complete line of radiation detection, personal dosimeters, staff radiation dosimeter monitoring, and safety products and solutions that allow these professionals the versatility they need to get the job done and the quality they trust in a radiation-safety device.
